Woodworking Equipment For Sale

AYEN SKB-50 Construction Hole Boring Machine for 32 MM System Boring; -- 50-Spindles total in (2) swivel heads with (25) spindles each, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°. -- Equipped with: 50-Spindle swivel head assembly converts quickly into (2) 25-spindle heads for double line boring, 5 1/8" min. distance between heads when line boring. -- Features: 3 HP - 3,450 RPM gear box motor, 39" panel width cap. with a 30-1/4" drilling width. -- Complete with: (2) 39" Fences with flip stops, (3) pneumatic quick-set hold-down clamps, quick fence setting gage, foot pedal control for drilling cycle / head positioning.

AYEN EXPERT-P Construction & Line Boring MachineSpecifications: 9-Spindle head tilts/swivels for horizontal or vertical operation or any angle in between and traverses left-to-right for (18) or (27) hole lines; -- 2 HP - 2,800 RPM motor, full cycle operation, (3) Sec cycle time, 34" max. drilling width, 4" max. clamping height.Features: -- Designed with a unique "shuttling" drill head that slides left-to-right on precision linear bearings, heavy-duty positive stops ensure accuracy. -- (2) 1-Meter combination infeed/line fences, (1) 1-meter rear fence, mirror-image fence setting gauge, (2) universal flip stops, (2) cutaway flip stops, (2) edge-type layout gauges, (3) synchronized air hold-downs, (2) pin stops, and dual foot pedal actuated control. -- Heavy-duty positive stops ensure accuracy. -- Complete with: Left & right fences with stops, (3) synchronized air hold downs, and foot pedal control.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6o BACCI MOD Double-Sided Oscillating Slot Mortiser Specifications: Max. slot depth 80 mm (3.15"), Max. slot length 4-3/8". Chuck size 16 mm (0.63"). Max tool dia. 50 mm (1.97"). Vertical table adjustment 100 mm (3.94"). Oscillation range 120 mm (4.72"). Oscillation speed 224 OPM. Equipped with: (2) 8” x 19-1/2” Tables, Each with Tilt 20° Left & Right. 3 HP - 9,500 RPM Spindle motor, 3 HP Oscillation motor. Hydraulic table feed. (2) Pneumatic hold-downs.

BACCI MOA Single Table MortiserMortises or bores holes on chairs, furniture or case goods. -- Single table and spindle, -- 3 HP - 9,500 RPM motor with (200) oscillations/Min. Features: -- 9" x 19" Table tilting +/- 20° (side-to-side), -- (1) adjustable overhead pneumatic holddown. -- 3" Max. slot depth, 4-3/8" max. slot length, 1-15/16" max. dia. tooling.

Machine for manufacturing mitered doors…cuts trims, drills and finger joints corners 3 HP saw with 400 mm blade (2) 7-1/2 HP shaping heads clockwise/counter clockwise PLC controlled

--In Auction: https://exfactoryauctions.com/Detail/LC-230120/event/A122024$1--NO RESERVE!-- --SUPER RARE MACHINE-- BACCI T4M-O 4-Spindle Asymmetric Copy Lathe, with Sanding & Enclosure Specifications: Distance between spindle centers 170 mm (6.69"). Max. working height 165 mm (6.50"), Max. copying length 1000 mm (39.37"). Standard cutter dia. 35 mm (1.38"). Cutter holder dia. 145 mm (5.71"). Cutter holder speed 5,300 RPM. Spindle speeds 25 & 42 RPM. Carriage speeds 75 - 200 mm/Min. (2.95 to 7.87 IPM). Equipped with: (4) Duplicating/carving/copy spindles. Complete with: (4) 130 mm (5.12") W Copy Belt Sanders for asymmetrical parts, with 130 x 990 mm (5.12" x 38.98") Belts. 114" x 92" x 88" H Enclosure. NOTE: Larger diameters possible by using every second carriage position, ie. (2) heads instead of (4) heads. Machine weight: 3,330 Lbs. Enclosure weight: 775 Lbs.

Bacci Artist Jet 6-Axes Machining Centre CNC - Installed New in 2019Description: Bacci, 6 Axis, ARTIST JET CNC Machining Centre with twin shuttle tables specially configured for clamping and cutting solid wood furniture parts.Specifications: X = 3,500 mm (pass through distance between the columns is 3,050mm) Y = 2,200 mm Z = 830 mm B = unlimited C = 400° (+/-200°) Rotating revolver head with two (2) 10Hp, double ended electro-spindles, ER32 tool connections, ceramic bearings, 24,000 maximum RPM provides fast 4-tool action Two (2) Electronic Inverters to independently control the spindle's rotation speed up to 24,000RPM Two (2) “TGV"; type working tables (Paolino Bacci patent), each table with three (3) 750mm long steel rails, adjustable center to center (C/C) distance up to 1,170mm The support surface for each table is 1,170mm x 750mm Semi-Automatic X-Axis positioning of the “TGV"; rails is included Eight (8) Pneumatic Clamping Cylinders, sliding on the sides of the “TGV"; rails The Artist/Jet is prepared for vacuum Clamping One (1) 100m3/h vacuum pumps is included Six (6) removable, frontal Free-Jig clamps Factory electrical parts upgraded for 2021 CSA electrical compliance.

Baileigh WR-84V, 220V 1 Ph, 7.5HP CNC ROUTING TABLE with Cyclone DC2100C Dust Collector 3hp Shipping Weight 3000lbs Actual Working Area 97" x 48" Spindle 7.4hp Z Axis Stroke 5.375" Maximum Moving Speed (Inches Per Minute) 590 Maximum Engraving Speed (Inches Per Minute) 590 Reposition Accuracy 0.0019 Tool Diameters ER32 Power 220V Single Phase Length 118" Width 78" Height 65" Weight (lbs) 2500 Table Style T-Slot with Vacuum Option 4x8' Table w/ Perfect for solid wood processing, making closet doors, furniture, signs, and much more. 0 to 18,000 rpm variable spindle speed range. 7.4 hp spindle has the power to cut hardwoods quickly and precisely. Spindle is air-cooled to prevent overheating, prolong the machine’s lifespan, keep it producing high-quality cuts. 15,000 mm per minute maximum engraving or travel speed. Solid steel gantry can tackle hardwoods at high speeds without flinching. Stepper motors with square rails ensure smooth movement along the X, Y, and Z axes. Use the handheld digital controller to move the spindle, adjust the speed, and go through your design. Comes standard with software that allows you to set up almost any kind of design. (Details below.) Upload your cut pattern to the table with a USB drive. Rack and pinion mechanism holds up over long periods of heavy use and allows for more fluid and precise movement than a ball and screw mechanism. 4 collets accept any standard tooling profiles with ?”, ¼”, 3/8", and ½” bit sizes. Includes 10 different tooling profiles. Steel T-clamps hold the material down on the table to reduce vibrations and prevent errors. Table is pre-plummed 4 vacuum zones, each with a separate valve and handle, ready to accept optional 7hp vacuum pump. Extremely rigid steel structure reduces vibrations and helps the table stay accurate for years. Dust shroud covers the spindle and vacuums out sawdust and wood chips while you’re cutting.

Has Cyclone DC2100C Dust Collector 3hp 220V Single Phase Table Style T-Slot with Vacuum Option 4x8' Table w/ Perfect for solid wood processing, making closet doors, furniture, signs, and much more. 7.4 hp spindle has the power to cut hardwoods quickly and precisely. Handheld digital controller to move the spindle, adjust the speed, and go through your design. Comes standard with software that allows you to set up almost any kind of design. Rack and pinion mechanism holds up over long periods of heavy use and allows for more fluid and precise movement

Baker Model D Resaw 16" Wide capacity Heavy Duty Return Conveyor

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

Balestrini "PICO" Round End Tenoner:Specifications -- Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons.

Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

Barberan UV Oven

--MAKE AN OFFER!---EXCELLENT CONDITION! Pair it up with a HOLZMA panel saw for true "Store & Saw" efficiency!-- BARGSTEDT PROFILINE TLF 210/15/08 INTELLISTORE Plane Storage System (Automatic Panel Storage & Retrieval System) Automatic system operations: Builds and stores stacks of panels of various material types, sizes, and thicknesses. Loads machines and builds rainbow stacks of panels. Replenishes panels between shifts and pre-sorts panels for upcoming shift. Verifies weight, size, and orientation of each panel. Records board usage and makes recommendations for future stocking levels. Increases storage capacity by eliminating transport paths. Specifications: Travel path 10,000 mm (393.70"), Range 5,000 mm (196.85"). Panel length 2,000 - 4,200 mm (78.74" - 165.35"), Panel width 800 - 2.200 mm (31.50 - 86.61"), Panel thickness 12 - 40 mm (0.47" - 1.57"), Max. panel weight 250 kg (551 Lbs.). Stacking height 2,100 mm (82.68"). Beam speed 60 MPM (196 FPM), Carriage speed 80 MPM (262 FPM), Lifting device speed 30 MPM (98 FPM). Positioning precision +/- 35 mm (1.38"). Infeed area in Current Configuration 6-1/2’ x 11’. Equipped with: "woodStore 5.0" Storage control, with 3D View, Stores all parameters, including suction, for each board. 7' H Fencing, with Walk-in door. Control Cabinet Dimensions: 78" x 31" x 90" H. NOTE: Layout has been modified and has not been integrated with a Panel Saw, Machining Center, or the like. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Barr Mullin Wondersaw Optimizer with Computerized Laser Controls Tichniess: Up to 3" Width: 31" Min cut: 4" Feed height: 34-1/2" Floor Space: Apprx 21' x 15' 480 volt

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

Bertheson Press Platform size 51 Wide X 102 Long with 2 16 ft shuttle driven aluminum runner platforms. Pressure 2500 psi and we ran a temperature of 350 degrees for Tego and 165 degrees for plywood. The Press can laminate Tego Film glue or pva c glue. This press is a double shuttle and can laminate up to 14 ft by double pressing on shuttle. We can get the press operational if you are interested. We only have to hook up the power. Very good condition!

BIESSE - SKIPPER V31: CNC Machining Center (Vertical) -- SpecificationsFlexible "Vertical" Machining Center that can reach movement speeds of: 164 FPM (50 MPM) in "X" & "Y" axis; 50 FPM (15 MPM) in "Z" axis with total safety. -- Max. Worktable Part Size"X" Axis is: 98.4" (2,500 mm); "Y" Axis: 35.4" (900 mm); max. part thickness: 2-3/4" (70 mm). -- Min. Workable Part Size: "X" Axis is: 7.8" (200 mm); "Y" Axis: 2.7" (70 mm); min. part thickness: 0.39" (10 mm). -- Boring Unit:(1) Boring block with: "QUICK CHANGE" spindle system; 4.2 HP (3 kW), variable speed from: 1,500 - 7,500 RPM; (10) vertical spindles: (5) Spindles in "X" axis; (5) spindles in "Y" axis.(6) Horizontal spindles with: (2 + 2) Horizontal spindles in "X" axis & (1 + 1) horizontal spindle in "Y" axis.(1) "X" Axis grooving saw; 9,000 RPM; 120 mm saw blade dia. -- Machining Unit:(1) 6 HP (4.5 kW) Electrospindle router with: ISO 30 Adaptor; variable speed from 1,000 - 20,000 RPM.ISO 30 "QUICK CHANGE" Push button tool change system. -- Operator & Machine Control:BIESSE XP 600 + "BiesseWORKS Advanced" Operating System.19" TFT Monitor; international keyboard, soft touch keypad & industrial mouse.RS-232 Serial ports; USB ports; (1) CD ROM drive; modem; Ethernet connection; Real-time multitask processing; programs can be transferred via diskette or downloaded by wire. -- Complete with:Pneumatic part clamping devices; sound enclosure; lateral grid protection & safety mats; forced autolubrication; air-conditioned control cabinet. Actual Model is: BIESSE - SKIPPER V31