Woodworking Equipment For Sale

Altendorf F45 Slider

Altendorf F45 Elmo Sliding Table Saw

1999 F 92 CE Altendorf 3200 Slid Table Saw S/N 99-11-802 220 Volt

--This machine is Lot#001 in an Auction on exfactoryauctions.com - NO RESERVE-- ALTENDORF ELMO CE 3,400 mm (11') 4-Axis Programmable Sliding Table Saw Specifications: Max. cutting length 3,305 mm (130.12"). Max. depth of cut with 450 mm (17.72") dia. blade: 75 - 150 mm (2.95" - 5.91") at 90°; 53 - 106 mm (2.09" - 4.17") at 45°. Dado cap. 15 mm (0.59"). Main saw: 5.5 kW (7-1/2 HP) Motor with automatic brake; blade dia. 450 mm (17.72"); arbor dia. 30 mm (1.18"); arbor tilt 0° - 45°; blade speeds 3,000, 4,000, 5,000 & 6,000 RPM. Scoring saw: 0.75 kW (1 HP) - 9,000 RPM Motor; blade dia. 120 mm (4.72"); arbor dia. 15 mm (0.59"). Equipped with: 14-1/2” x 134” x 36” H Aluminum sliding table with middle & end position locking; fixed table. Main saw blade programmable height & tilt adjustment. Automatic main saw blade height/tilt compensation. Scoring saw motorized rise & fall and Iateral adjustment. "TYPE 1160-160-30" 47” L x 3-1/2” H Programmable rip fence with: 1,300 mm (51.18") Cutting width cap.; 15 MPM (49 FPM) positioning speed; automatic dimensional correction for saw blade tilt. "TYPE 1160-160-31" Programmable crosscut fence with: 3,200 mm (125.98") Cutting cap.; 15 MPM (49 FPM) positioning speed; 700 mm (27.56") cross slide extension; (2) flip stops; sliding outrigger support. Eye level touchpad control with LED Displays for main saw blade height & tilt, rip & crosscut fences. Automatic central lubrication for saw unit tilting with: Digital oil level monitoring. Swing away, parallel blade guard.

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.

ALTENDORF F-45 ELMO III 3-Axis Programmable Sliding Table Panel SawSpecifications: -- 133" (3,400 mm) Cutting cap., middle & end locking positions of anodized aluminum sliding carriage, metal guide ways are self-cleaning. -- Motorized tilt, height & rip fence positioning. Equipped with: -- 7.5 HP Main saw motor, (4) cutting speeds of 3,000 - 4,000 - 5,000 & 6,000 RPM with a digital readout on control panel;16" max. saw blade dia. with 30 mm bore. -- Max. cutting height 5-7/8", width between saw blade & rip fence up to 51". Features: -- Display screen at eye-level for ease of operator programming; scoring unit with 1 HP motor, 9,000 RPM with a 5" dia. shimless saw blade; -- Easy programming using a keypad and display screen; digital display of tilt position & cutting depth. Complete with: -- Rear table extension, overhead blade guard w/dust collection. -- Extendable crosscut fence with (2) flip stops, (1) digital readout, sliding table lock mechanism.

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.

Altendorf Sliding Table Saw

ALTENDORF F-45 Standard Sliding Table Panel SawSpecifications: -- 3,200 mm Sliding table length, 126" cutting length; 16" main blade cap. (18" blade cap. without scoring), 4-7/8" depth of cut, 51" rip cut cap., 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Manual raise & lower of the main blade, and tilting of saw group from 0° - 45° with digital readout to 1/10th deg., (4) cutting speeds of 3,000 - 4,000 - 5,000 & 6,000 RPM with digital readout. -- Includes: -- Tigerfence positioning rip fence, 19/32" dado capability, sliding table lock mechanism and 31-1/2" x 29-1/2" table extension. -- Complete with: -- Crosscut support table; 2,100 mm long extendable crosscut with (2) flip stops.Note: Missing overarm blade guard assembly

ALTENDORF F-45 Sliding Table SawSpecifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.;7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel, (4) cutting speeds of 3,500 - 4,000 - 5,000 & 6,000 RPM with digital readout;49" rip cut cap with aftermarket digital readout. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops and (1) set of blades.

American Rotary AI 40-PAD-UL industrial phase converter- 40HP, UL certified, outdoor cabinet and mounting but was used inside, very little use. Price Reduce! $4,500 OBO 301-501-6344.

AMERICAN STRAIGHT LINE RIP SAW

Stage #1 48” width 2 lights Stage #2 40” width 3 lights 220 volt singular phase

The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise direction - Compares to the Marunaka SL-250 - 9-7/8" (250mm) Max lumber slicing width: With up to 9-7/8" high cant, veneer thickness 1/25" to 3/8". 75° knife angle with 18 ° knife bevel - Knife length: 46-1/2" (1,180mm) - Motorized upper feed beam with Continuous belt feed - Variable speed: 120-180FPM (40-60 m/min) - 30HP feed motor - Head elevator: 1HP - Approximate weight: 16,000 lbs - 327"L x 62"W x 75"H

APEX LS-TS 300 Brush / Denibbing Sander;The Apex LS line of lineal sanders are designed for effective multi-sanding in one pass with a working width of 12"; (300 mm). The LS-T sander has two top sanding heads, one left and one right sanding head with a motorized conveyor. Machine is designed to process the top side of product in a single pass.Function: -- The sanding units are adjustable in height, width, rotation and RPM, in order to set them exactly to suit different shaped profiles and applications. The LS-TS lineal sander incorporates large diameter sanding heads to increase sanding dwell time to achieve aggressive whitewood sanding at increased feed speeds. -- All sanding heads are reversible and can be fitted with double sided abrasives to accommodate for multiple applications such as raw wood sanding, sealer / primer sanding or wire brushing/ distressing. Standard Features: -- Heavy-duty frame design -- Counter rotating large diameter sanding heads -- Conveyor belt feed with four spring loaded hold-down rollers -- Constant height of through feed -- Digital readout counter for sanding heads -- Four – 4"; (100 mm) dust extraction outlets -- All sanding heads have reversible rotation -- Machine can easily be moved with pallet jack, fork lift or rolled on casters Specifications: Thickness of Work-piece 0"; - 4";, 100 mm Conveyor Belt Width 12"; - 300 mm Motor on each spindle 1-1/4 HP Conveyor motor 1 HP Speed of Spindles 100 - 500 RPM Brush height 12"; Top heads / 4"; side heads Feed Belt Speed 10 - 50 FPM – variable 480 Volt / 3 Phase / 60 Hz Total amps - 23 Machine Weight 1,950 Lbs Machine comes with aluminum hubs and loaded with abrasives

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6e ARMENTIA RE-40-1000DE Vertical Resaw, with Power Feeder Specifications: Throat 16-3/4” Front table size 24” x 36” x 33-1/2” H. Max. cutting height 11". Blade width 3". Equipped with: 25 HP - 1,760 RPM Motor. 19-1/4" Cast-iron wheels. 10” W x 1’ L & 4" W x 1' L Vertical gravity rollers, with 1-1/2” Dia. Rollers on 2” Centers. (2) 2” W x 8” Dia. Sprocket-type feed wheels. Complete with: HOLZ-HER "ET 117" 3-Roll 8-Speed Power Feeder.

---Liquidation Listing---Free Loading--- 60 HP Rotary Screw Air Compressors (2 Available) https://exfactoryauctions.com/Detail/AC-232162/event/L052024$1

Auburn End Pro End Matcher Width Cap: 8" Thickness cap: 2" Spindle motor: 5 HP Min piece length: 4" Variable speed spindle Spindle diameter: 1-1/4"

This listing is for a commercial grade heater that can be used for heating your facility or if outside air is ducted in can be an air make-up unit This is designed for inside installation. It was not originally used as air make up but in mild climates will be able to be used that way with duct work that needs to be built on site by a contractor. Foot print size of the unit is 46" x 46" Height 144 "Natural gasCFM 7,500BTUH input 400,000BTUH output 320,000Fan Type belt drivenHP (1) 2 HP fanFlue size 8" qty (1)Unit weight 1,250 lbs

AXYZ Panel Builder 5018 CNC Router