Stationary Wood Chippers For Sale

Nicholson Flat Drum Chipper 9'5' x 55" Includes: Trailer, AC power, belt conveyor, switch gear option. System chipped just over 120 truckloads

48" Beloit-Passavant Chipper

PETERSON PACIFIC 5000G WOOD CHIPPER (DIESEL) --Specifications: CAT 3412E 1000 HP Diesel Engine; 3-Flail, Key Knife system currently set for 5/8 chip size. --Recent Machine Overhauls (per Seller): Overhung load adapters both replaced within 1000 hrs Fan pump replaced within 1500 hrs Swing/ boom pump replaced within 750 hrs Stick boom pump replaced within 100 hrs Engine computer less than 750 hours High pressure fuel pump less than 750 hours New radiator last summer Update main boom pump & flow divider last fall Installed a new seat 2 years ago New muffler New auxiliary bark pusher pump --Includes: Spare flail pump, Spare flail motor, New feed roll teeth, Spare belts, Spare pins, Seal kits, Spare clutch, Various other Spare parts --Hours: To be advised. --Contact Us for Competitive Leasing Options! --All equipment is advertised to the best of our knowledge and everything is sold “AS IS"; with no guarantees.

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 66" 6 Knife Chipper

Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135

58" 6 Knife Precision Chipper

Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready for production

Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NEW!! in-stock and ready to ship

Used Precision horizontal stationary chipper, 66”, 6 knife. Precision Husky stationary electric chipper Horizontal infeed Bottom discharge 6 knife Knife size: 21 ½” x 6” Choice of electric motors available Can provide a video of shaft/disk rotating with dial indicator on shaft. Chipper was cleaned & repainted, we do have photos before we painted it Additional photos, videos and information available. Contact us for a delivered price. Vidoe links to view chipper disc and shaft: https://youtu.be/3EXsqK1677s https://youtu.be/hNNTHv3zdMQ https://youtu.be/dw2Egvu91aw

48" Precision Chipper with 100hp motor, vibratory conveyor feed included. $12,000 Call 706-271-8444 or 423-584-7380

Precicion 66" Chipper 6 Knife Horizontal Infeed / Top Discharge S/N C-2865

48" 3 Knife Chip Pack S/N C-1029 75HP Electric Motor 5'x 5' Chip Screen

2001 Precision 58" 6 Knife Chip Pack 150HP Elec Motor S/N 3355, 6' x 6' Chip Screen, Cyclone & Pipe S/N S-2375, Precision Dual Trailer Loading System.

Precision 58" 3 Knife Horizontal Infeed Top Discharge

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition

66" dia. 6 knife, side/ rear discharge, good working condition

75" Precision 6 Knife Chipper S/N C-1732