Pallet Equipment For Sale

Used -like new,2024 UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. Wired for 480V. READY TO SHIP. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.

New April 2024 barely used Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342 Seller will load on your truck

PRICE REDUCED 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO

3 Head | 6x8 Resaw Model | 480V

Board Deduster

New April 2024 - Very low use Go Fast board deduster w/ side brushes, debur and board knocker, D3 Series 6" wide 1/4 - 2 1/2" thick boards, 5 HP 480 V (3) phase, 5 HP variable feed hydraulic self-contained, So new packing slip still attached, Ref #204, Contact Jackie Kittrell 931-698-3342

The Go Fast Deduster is the solution to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. THE DIFFERENCE: There are several features that set the Go Fast DeDuster apart from the rest, and it all starts with the brush! Our side sweeping disc brushes sweep sideways, providing cleaner boards than traditional drum brushes. They also do not require an air collection. BOARD KNOCKER: Our famous board knocker system helps meter the boards through the machine one at a time. It breaks frozen and sticky boards apart and prevents 99% of jams!

GO FAST DD79 DEDUSTER High Speed Board Deduster 230V 3Ph

- (2) 10” Diameter Steel Brushes (Side Sweeping) - 3/8- 2.5" Tall, 2- 6-1/4” Wide, 18” Minimum Length Capacity - Self Contained 5 GPM System - 10 Gallon Hydraulic Fluid Reservoir - Variable Belt Speed 0-700 FPM - Machined Eccentric Press Cam Board Knocker - Adjustable Feed Belt Height: 27”- 36” - Exit Pinch Roller Height: 34” - 5 HP Motor (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - 13.4 FLA -Dimensions: 90” L, 29” W, 59” H - Weight: 1400 lbs

Line shaft ready with a return belt. 2 small hydraulic units installed plus a sizer inline. Good condition.

TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 10" to 22" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2650 lbs - (2) 20 HP Arbor Motors (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Panel Face Mounted Rotary Disconnect - Panel Location: Lower Left Side - 96 FLA Will need dust chutes if not using with waste conveyor

Go Fast 2NXL Double Head Notcher Very Good Condition 480V 3PH 60HZ

Yard Saw | UNK Year | 480V | 90" Usable Bar Length

8 foot bar 11HP electric motor 489 volt 3 phase

Chop Saw. This machine is a Hazeldine upright chop saw. Item #00708

Hazeldine Chamfer Machine

Hazeldine Chamfer Machine

Hazelthorn Chamfer Machine

Hazlethorn Pallet Notcher Model A10