GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator NO MOTOR, LID OR DRIVE TRAINSpecifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAR

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

GRANUTECH-SATURN - BIG MAC, ...Used Car Crusher471 Detroit Diesel EngineSpecifications: -- Widely recognized as the industry standard, "Big MAC" flatteners combine high performance and low maintenance characteristics in a mobile auto crusher. The result is an unparalleled record for equipment performance: more than 90% of all "Big MAC" flatteners ever made are still at work, with machines built in the 70’s still in operation today. -- Featuring Heavy-Duty “quick-set-up"; hydraulic cylinders that can be quickly and easily raised for operation or lowered for travel, the "Big MAC" flattener meets the needs of today's mobile scrap processor. Offering a wide, opening for easier loading and larger capacities, the "Big MAC" is built to perform. Multiple automobiles can be easily compacted into dense bundles, reducing both onsite storage demands and transportation costs.Key features and benefits include: -- Quick setup design -- Air Compressor -- Waste oil collection tanks -- 6-Cylinder Tier III engine -- 6" Cylinder rods -- Hydraulic landing gear -- Heavy-Duty push bumper

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

GRIZZLY G0631 Downdraft Sanding Table28" x 79" Table area with a 1 hp motor using a squirrel cage fan pulling up to 1,437 CFM, to pull the dust away while sanding on Non-maring rubber grommets to suport your work. -- Table surface area 25 1/4" X 76 1/4", table height 31 1/2" -- 1 st stage filter 16" X 25" X 1"; 2nd stage filter 16" X 25" X 2" -- Filter micron: 1/0.3 -- Inlet size 8" Features; -- SHeet metal table construction, -- Easy access filter bay, quiet operation 68 Db, -- Two convenient dust drawers -- Table surface 39-1/2"x 28". -- Filter size 16"x 25"x 2" cleaning down to 0.5 micron. -- Working height of 37".

GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.

GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.? -- Has not been used since 2015GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Has not been used since 2015 -- Loaded onto your truck.

HAAS - 2000XL 2.0, ...Mobile ShredderLow Hours; 2018 YMFG.Specifications & Features: -- Can be used at any location (comfortable transport measurements). -- Easy & quick positioning thanks to crawler track and radio remote control. -- Shreds different materials with just (1) tool configuration. -- High throughput capacity of up to 100 tons/Hr. -- Resistant against foreign bodies. -- Low wear cost and long lifetime. -- Service and maintenance friendly. -- No wrappings; self-cleaning. -- Quiet main drive.

HAMMEL 750D HAMMERMILL NEW IN 2019Approx 3,000 Hours --Hydraulic recycling machine with 2 slow running tool shafts --Suitable for Wood (Old wood, construction & demolition wood, rhizomes, green waste, pallets, cable drums) or Rubbish (Domestic waste, industrial and commercial waste) and Paper, paper rolls, aluminum profiles and balesAdvantages: --Increased performance for more throughput --low energy consumption --Very easy to maintain --User-friendly handling by IFM control --Better accessibility of the control panels --Low noise --Tilt funnel with increased inclination for optimum material flow --Mobile on a chain or semi-mobile on a hooklift

HAMMOND DK-1055-B Cyclone Dust Collector w/ After-FilterSelf-contained indoor cyclone type unit w/afterfilter bags, the blower wheel is located on the clean air side and is direct driven by 7.5 HP motor @ 3,600 RPM, performance ranges 3,470 CFM @ 5" H20, 2,727 CFM @ 8.6" H20, 2,200 CFM @ 11.4" H20. -- (1) 10" Dia. inlet and (1) 8.5" x 15" outlet; waste discharges via bottom of unit to (2) 55-gal. drums (drums not included). -- Includes: Multi-exhaust manifold with (4) after-filter bags, 167 sq. ft. cloth area, push button starter.

SPX FLOW HANKISON HPRN200 200 CFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Cap. 200 SCFM at 100 PSIG & 100° F. -- Max. working pressure 232 PSI. -- Max. inlet temperature 120° F -- Refrigerant type R-407C.Equipped with: -- 200 W (1/4 HP) Refrigeration compressor motor. -- Stainless steel cross flow heat exchanger. -- LED Dew point indicator. -- Dry alarm contact. -- Timed electronic drain valve.

HARMONY - S60-XDRC: Vertical BalerSpecifications: -- Motor: 20 HP. -- Bale Size: 30";x 60"; ≤ 48";. -- Bale Weight (OCC): Up to 1,000 Lbs. -- Feed Opening: 25″ x 60″. -- Ram Force: 92,360 Lbs. -- Volume: X-Large 7" cylinder. -- Loaded onto your Truck!

WOLVERINE Two Ram Auto Tie Baler with Infeed Conveyor --Cylinder replaced in 2018 --BALE SIZE Width 46"Height: 31"Length: 61" --BALE VOLUME cu.ft. 50 --CAPACITY cu ft./hour 10,975 --CHARGE BOX OPENING inches 41" x 60" --HOPPER OPENING inches 40-3/8" x 60" --MAIN PUMP 60 GPM --SYSTEM PRESSURE PSI 3500 --MAIN RAM FACE PRESSURE PSI 145 --EJECTOR RAM FACE PRESSURE PSI 84 --SHIPPING WEIGHT 20 TonsBALING MATERIALBulk OCCSolid WasteNewsprintWhole Aluminum CansSteel CansPlasticNon-FerrousHDPE

HARRIS HRB-SR 2-Ram Horizontal BalerBC-011225: -- Main motor: 100 HP -- Cylinder: 12" -- Bale size: 45" x 45" x 56" -- Force: 198 Tons -- Bale ejector bore: 8" -- Bale ejector force: 88 Tons -- Side ram bore: 6" -- Side ram force: 9 Tons

HARRIS PIRANHA Full Closed Door Horizontal BalerSpecifications: -- Cylinder: 10" -- Main motor: 20 HP -- Feed opening: 56" x 36"Equipped with: -- Full Pen

HARRIS-SELCO - HLO-608AR40: Open-End Auto-Tie Horizontal Baler -- Motor: 40 HP. -- 8" Cylinder with: 80" Stroke. -- Infeed opening; 45" x 60". -- Bale size: 48" x 40" x Variable. -- Bale weight: Up to 1,800 Lbs (OCC). -- Production capacity: Up to 6 T/Hr. -- Shear blade. -- Platen force 113,100 Lbs. -- Completely refurbished. -- Warranty: (180) Days Parts/Labor Warranty. -- Loaded onto your truck.

HARRIS/SELCO - HLO-60AREB: Horizontal Auto-Tie Baler -- Motor: 2 – 100 HP. -- Cylinder: Rebuilt 12″. -- Hopper: 80″ Long. -- Hours of Operation: 14,000. -- Tons Per Hour/OCC: Up to 26 Tons. -- Includes 72″ MAYFRAN Steel Belt Feed Conveyor.

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. Specifications: -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 ° to 7° -- Electroni display of cutting height -- Blade Capacity 4270 X 25 X 0.89 mm. -- Wheels Diameter 725 mm -- Return conveyor on machine top