2007 Weinig Powermat 400 6-Head Moulder 2007 Weinig R960 Profile Grinder Weinig Measuring Stand HSK heads Radial head controls More info coming!

60” x 96” table Vertical Linear Motion option 460 volt 3phase includes 5’ x 5’ 10,000# capacity scale as seen on table Approx 20 hours on machine

Liebherr L 564 Loader as pictured

Liebherr L 564 Loader as pictured

Leadermac 630C 12" x 6" capacity New moulder on order...this one available mid to late summer 2024 Currently not under power

Leadermac 630C 12" x 6" capacity New moulder on order...this one available mid to late summer 2024 Currently not under power

Can process short & long stems or cants in one pass into pallet boards, dimensional lumber, cants/timbers LogRippers have 2 chipping cutter heads which eliminate 2 side slabs Power Requirement: ~3 phase, 380V, 50Hz or ~3 phase, 460V, 60Hz. Can work in 3 modes: -Rip-Saw / Cant-Saw -Horizontal Multi-Saw -Slab Processor

Can process short & long stems or cants in one pass into pallet boards, dimensional lumber, cants/timbers LogRippers have 2 chipping cutter heads which eliminate 2 side slabs Power Requirement: ~3 phase, 380V, 50Hz or ~3 phase, 460V, 60Hz. Can work in 3 modes: -Rip-Saw / Cant-Saw -Horizontal Multi-Saw -Slab Processor

HEESEMANN LSM-8/3-OSR Wide Belt Finishing Sander 52" and (3) Heads; Equipped with: (1) longitudinal segmented platen head. and (2) Orbital Platens Machine equipped with HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 16 mm (5/8") The computer control will hold a maximum of (20) programs. 1st Head: Longitudinal segmented platen head. - Segmented Polishing Platen, 20 & 27 HP dual speed motor. - Electronically controlled segments to conform to panel size - 2620 x 1350 mm (91.4 x 53.2") Sanding belt. 2nd & 3rd Heads: OSR Dual orbital action head with - (1) high-speed orbit on sanding pad, powered by 3 kW (4.5 HP) motor. - Secondary oscillation movement of platens powered by 1.5 HP motor. Upstream and downstream vacuum chutes on each head for dust localized dust pickup. - Platens feature "quick change" abrasive material; Both orbital heads with variable speed inverter drives. - Out feed Rotary Brush with cleaning brush loading with single end adjustment , 6" max. dia., 3.4 HP motor. - Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive. - In feed and out feed Scissor Lift and Control box shown are not included. - Motorized thickness opening 1/4" to 3-5/32" max. - - Power Consumption: 63 KW, 75 Amps. - Separate display console for CSD control.

HMC Corporation Sawmill Has a 36 inch diameter blade

HMC Corporation Sawmill Has a 36 inch diameter blade

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Vollmer CP650 Used Regularly Well Maintained

Vollmer CP650 Used Regularly Well Maintained

Flush milling aggregate for Homag , IMA, Morbidelli

Flush milling aggregate for Homag , IMA, Morbidelli

This plant was set up as a test site for a an oil company that was using steam to extrude oil from the ground. The equipment needs to be moved, as the land it is on has changed owners. Basic listing information: Biomass plant dries wood (and other fuels) and feeds a burner to make steam. Fuels include: Wood, crops, manure and straw. The unit claims to have 80% efficiency. System consists of fuel receiving, handling, preparation biomass to steam energy conversion and all material handling equipment. Basic equipment list: - Fuel receiving: West Salem (WSM) unloader and conveyor - Screening/Separation: WSM Metal Detector, Eriez 18" Magnet, BMM 3'x8' double screen, WSM 100 HP Grinder, Kice Baghouse - Wet Fuel Feed: WSM fuel bin, metering bin, drag chain, feed diverter - Heat System: Dryer meter screw conveyor, rotary airlock, feed screw conveyor, 12' x 48' single pass dryer, inorganic separator - Fuel separation cyclone with magnet, dryer fan, dryer baghouse, rotary airlock, baghouse cleaning fan - Dry fuel storage bin, agitator, rotary air lock, screw conveyor, belt feeder, baghouse - Gas burner 25 MM BTU, FGR fan, fuel conveying air fan

Tilt Hoist