Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks; 1.5 HP motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 5-1/2" - 8" max. square blocks; 3 HP motor belt drives 4-3/4" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

MIKRON M-645 Multi-MoulderDesigned for curved casings, crowns, circles, ellipses, and straight mouldings, go from straight to curve in just one setup — no accessories requiredSpecifications: -- Unit size: 34″ wide x 30″ deep x 65″ high (5′ min. front to back clearance needed) -- Worktable size: 38" wide x 24″ deep -- Weight: approx. 1,400 lbs. -- Motor: 5 hp -- Arbor: 1-1/4″ diameter, 6″ long -- Spindle: 6,000 RPM (reversible) -- Feed rate: 0 to 30 feet per minute (forward and reverse) -- Cutting circle: Horizontal = 6-1/2″ max. - tilted = 6″ max. -- Thickness: 7″ max.Equipped with & Features: -- Manual tilt spindle, Floating worktable, Variable speed feed motor — 0 to 30 feet per minute -- Separately adjustable feed rollers to enable multiple passes, Axial adjustment, Mechanically adjustable fence for accurate, easy positioning -- Linear tracking system guides the work piece smoothly and directly under the cutter head, while keeping it flat -- Maximum cut is 6″ wide by 6-1/2″ thickUses a standard 4″ diameter, 2-knife corrugated back cutter head

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

MINNESOTA 24-8 Multi-Spindle Carving Machine.Specifications: -- Spindles/Capacity: (24) Spindles, 8" between centers & 72" length capacity. -- Motors: (12) 0.75 HP motors with (1) motor driving (2) spindles via flat belt. -- Features: Manual table elevation, motorized stock rotation, non-indexable head. -- Comes with: (2) Sets of carving tools (one medium and one fine). -- Includes: Tables for flat carving - to be confirmed (?).

MOAK - NO. 7, ...Spindle ShaperSpecifications: -- 1.5 HP motor, belt driven to spindle; 9,000 RPM spindle speed; 1" diameter spindle. -- Length of spindle above table is 5"; 3-1/4" vertical adjustment of spindle; 22" x 42" table; manual starter; 750 Lbs machine weight.

MOLDOW 184 MXN-324 Expandable Baghouse - 18 Total Modules with (4) Inlet Sections. Specifications. -- 72,000 CFM modular/expandable unit, currently with (14) Filter sections @ 5,000 CFM per section (24 bags per section). -- Approx 336 filter (8.6" dia. by 120" long) , 9,300 sq. ft. of total filter media, 7.75:1 air to cloth ratio Shell is under negative pressure allowing a high efficiency clean air fan.. -- Main Fan: Air Handling IAP A600 SWSI, Class IV, S/N 26862-1 rated at 90,000 CFM @ 1321 RPM, 16.0/20.3" SP & 290/308 BHP. Fan is A - Airfoil type wheel & is non-overloading powered by MARATHON "445Ta" belt driven TEFC 300 HP motor.. Currently fan inlet is connected with a 30" pipe. Regenerative Filter Cleaning: -- Each row of filter bags is cleaned continuously during operation by use of a regeneration carriage/trolley rides along top of filter bank) with a 4 KW (5.3 HP) high-pressure fan that sends air from the clean-air chamber back through the filter bags using nozzle pipes.Bags are fitted with an inner spring bracing. Special bag design reduces air velocity which increases air and dust loading considerably. -- Equipped with: Built-in bottom drag link chain which brings dust to one end where it is discharged through approx. 9" x 30" Rotary Air Lock (RAL). Currently a transfer fan moves dust to storage bin.. Summer/Winter Diverter/Abort Gate connected on outlet/return air line.Comes with: -- Relay Fan, IAP 911 RBO, to pneumatically convey collected dust at discharge of RAL. -- Platform with safety railings and ladder to access regeneration cabinet (return air plenum). -- Interior electrical control panel, support frame, and exterior ductwork. Single heavy sheet metal flanged rectangular return air pipe. Overall Dimensions: -- 45' Long by 12'-9" wide by 28.5' high (5.5' hopper to ground, 8' high hopper and 15' top section). -- Professional dismantling, rigging, transport and installation is available upon request.

OSAMA S2R-1600 1600 mm (63") Top & Bottom Glue SpreaderSpecifications: -- Panel thickness 0 - 100 mm (3.94"). -- Pass line height 800 mm (31.50"). -- Feed speed 18 MPM (59 FPM).Equipped with: -- 185 mm (7.28") Dia. x 64" L Grooved anti-acid rubber-covered top & bottom applicator rolls, each with Manual brush washer, Side glue wipers. -- 21-3/4"; x 72"; x 2-3/4"; D Removable stainless steel bottom pan. -- Front & rear safety fences.NOTE: This machine is also being offered for sale as a part of a Feed Through White Glue Laminating Line (EXF #LA-011187).

OSI SM-450 Side Matcher LineSide Matcher:FEATURES -- Directly opposing heads (Side-Matcher): Enhances width tolerance and eliminates pistol grip -- Guarantee machining accuracy of +/- 0.002"; (0.05 mm) on width and on tongue/groove position -- Through feed system in both machines: work boards as short as 9"; (229 mm) out of the defecting station; can be processed directly into the Side-Matcher -- Process twisted, crooked and bowed boards -- Hydro-lock collars on all axis -- Feed wheels on independent suspension -- Very low friction -- High precision spindle -- Very short setup time Easy and quick width adjustment -- Easy opening for tool replacement -- Hydraulic unjammingSpecifications: -- Pre-Milling top and bottom with (2) 15 HP motor -- Feed speed 200 to 450 FPM -- Board width 1 1/2" to 8" -- Board thickness: 1/2" to 1 1/2" -- Board length: minimum of 9" trough feed -- Tooling: (2) X 8", RPM 6,000 -- Spindle drive: (2) X 30 HP -- Feed wheels: (2) rows of (4) wheels on top driven by (2) 3 HP motors -- Feed rolls: (3) chromed rolls on bottom driven by (3) 2 HP motor -- Axis movement: on linear bearings

“PE11 POWR EDGER 2200 RP” Single-Spindle Automatic Glass Edging Machine ----Price Negotiable----Make an Offer! - Glass thickness 1/8" to 1/2" - Minimum glass edge length 12”, Minimum glass height 4" - Maximum glass weight 250 Lbs. - Maximum conveyor speed 66 IPM - Hub capacity: 2 Wheels simultaneously, 7" Diamond grinding & 7-1/4" or 8" Polishing - Hub will accept wheels to produce flat & seam, miter & pencil edging - Grinding/polishing selector wheel - 1 HP 3,450 RPM Spindle motor - Variable speed conveyor, with Reverse - BALDOR DC Drive for Conveyor & Spindle - 124" W x 50" H Back rack, with (3) Support bars - Coolant pump - Palletized Dimensions: 124” x 43” x 87” H #glass

EPSON SC-P20000 LARGE FORMAT PRINTER ---Price Negotiable---Make an Offer!--- Only approx. 300 prints made! Complete with Auto take-up reel for roll-to-roll printing! - “SURECOLOR P20000 Standard Edition” 64" Color Inkjet Printer, with Auto Take-Up Reel - For high-production photographic, fine art, & indoor display graphics printing. - Maximum resolution 2,400 x 1,200 dpi - Line accuracy: +/- 0.2% of specified length (+/- 0.26 mm min) - Maximum roll width 64”, Roll core diameter 2” & 3”, Maximum roll dia. 6.7" - Minimum page length 11" + Top & Bottom margin, Maximum print length 590.55" depending on application used, version of application, & operating system - Minimum sheet size: 8-1/2" x 11", 11" x 17" Recommended, Maximum sheet thickness: 0.5 mm (0.02") Top loading & 0.8 - 1.5 mm (0.03" - 0.06") Front straight-through loading - Production print speeds: 68 (Extreme quality) - 1,311 sq. ft./hr. (Draft quality) depending on multiple factors - Photographic print speeds: 1 min. 4 sec. (600 x 600 dpi) - 16-1/2 min. (2400 x 1200 dpi) depending on multiple factors - EPSON "ADVANCED PRECISIONCORE MICROTFP" 8,000-Nozzle 2.6" Drop-on-demand printhead, with (800) Nozzles x (10) Color channels, Real-time black ink selection with Photo Black & Matte Black ink channels selected automatically based on media type, Automatic nozzle verification, Variable droplet technology with smallest droplet size 3.5 Picoliters, Max. number of droplet sizes per line 3 - EPSON "ULTRACHROME PRO" 700 mL x 9-Color/10-Ink (C, LC, VM, VLM, Y, GY, LGY, DGY, PK + MK) Intelligent Ink Cartridges - Real-time media adjustment system - Internal rotary cutter - USB 2.0 & 100/1000Base-T Ethernet ports - 320 GB Internal print server Includes: - Set-up & Quick Reference Guides - EPSON "KM11A/C12C932201/SCPARFU44" Automatic Take-Up Reel (2017)

SEALED AIR CORP INSTAPAK 901 FOAM-IN-PLACE PACKAGING SYSTEM ---Price Negotiable---Make an Offer!--- Produces custom-fit foam protection for any package! - Foam-In-Place Packaging System - Foam output rate: 5 to 7.5 Lbs./min. - No. of programmable dispensing times: 10 - (2) Electric metering pumps - Self-cleaning dispensing gun - Controller with LCD Display, Output controls, Timers, & Self-diagnostic features - SEALED AIR "INSTAMATE" Film roll

OVERBUILT BALER/LOGGER Logger/BalerThe OverBuilt baler/loggers are the fastest, most efficient baler/loggers any scrap recycler can own. Compressing scrap metal and vehicles into denser, stackable forms results in more efficient loading and transport.Specifications: -- Charge box open:20’ x 8’ 5"; -- Closed: 240"; L x 40"; W x 26"; H -- Bale Size: 40"; x 26"; x Variable -- Min. variable distance: 22"; -- Bale density: 25 - 80 Lbs/ft³ -- Main compression cylinders: 2 -- Logging Force (per side): 175 tons -- Charge box door cylinders: 6 -- Baling force (per door): 255 tons --Approx 3,000 hours

OVERBUILT BALER/LOGGER Logger BalerThe OverBuilt baler/loggers are the fastest, most efficient baler/loggers any scrap recycler can own. Compressing scrap metal and vehicles into denser, stackable forms results in more efficient loading and transport. Approx 5,500 hoursSpecifications: -- Charge box open:20’ x 8’ 5"; -- Closed: 240"; L x 40"; W x 26"; H -- Bale Size: 40"; x 26"; x Variable -- Min. variable distance: 22"; -- Bale density: 25 - 80 lbs/ft³ -- Main compression cylinders: 2 -- Logging rorce (per side): 175 tons -- Charge box door cylinders: 6 -- Baling force (per door): 255 tons

OVERBUILT - 10 Portable, ...Car CrusherIncludes Remote, FULLY LOADED. Specifications: -- (2) 10" Cylinders. -- Height: 10 ft. (raised); 24" ( lowered). -- Width: 7-1/2'. -- Length: 20-1/4". -- Lid movement: 8 ft. (Travel) -- Hydraulic cylinder: 10" x 4" Rod x 96" travel. -- Pressure: 2,400 PSI. -- Crushing force: 159 Tons

PRS MODEL T Pallet StackerSpecifications: -- Fixed 48x40 -- Hydraulic Lift and Chain Conveyance -- Fully Automatic -- Programmable Stack and Eject -- Factory Refurbished Fall 2022

PRS H-SERIES Pallet StackerHydraulically powered, fully automatic pallet stackers.Specifications -- Adjustable pallet size capacity: 30"; x 30"; up to 60"; x 60";. -- Uses fork type clips that hold the pallets in the fork openings. -- Live in/out feed chain conveyor integrated - powered with hydraulic gear motors. -- Heavy-duty scissor lifting mechanism. -- Programmable stack count, and automatic stack eject. -- Hydraulically powered 2 HP - 3-Phase power unit. -- Fully automatic operation. -- Compressed Air is required. -- Machine footprint: 7’ x 7’, 24" top of chain conveyor -- Stacks (10) pallets per minute. (2) Units available

PRS H-SERIES Pallet StackerPRS pallet stacker can handle pallets ranging from 30" to 60" squares, 5 HP hydraulic power unit, 40 PSI air supply required, anti-tip bars, infeed timer logic system, programmable stack eject. -- Complete with: Live infeed, automatic pallet stacking and automatic stack discharge, capacity of (7) pallets per minute, requires 7' x 7' floor space.PRICING SUBJECT TO CONFIRMATION.