KUNDIG DUPLEX 53-RC-E Wide Belt Sander (2) Heads; 52" Width cap. Drum, Combination Head.Head Configuration1st Head: 7-1/4" Dia. rubber covered contact roll, 25 HP motor.2nd Head: Combination head with rubber covered contact roll and segmented finishing platen, infeed sensors sense the panel and electronically control the platen height with timers, variable edge control can also be set, 20 HP motor.Specifications: Abrasive belt size 54" x 75" with air tensioning and electronic abrasive belt tracking, both heads with abrasive grit thickness adjustment, 2 HP Variable feed drive. -- Conveyor belt speeds 9 - 45 FPM, controlled by electronic inverter & adjustable on the control panel; infeed & outfeed rubber covered holddown rollers.Equipped with & Features: -- Workpiece thickness cap. 1/8" - 6-1/4", motorized thickness adjustment with LED readout. -- A joystick controls the conveyor opening and start/stop of the feed, automatic "over-thickness" protection and automatic conveyor belt tracking. -- Constant passline of conveyor height at 35". -- Air blow off of second head abrasive belt. -- Emergency stop button, motor load meters, magnetic controls.NOTE from the seller: There is a small leak in the air bladder . The sander has 6,541 working hours

KUPER FLI 1250 INNOVATION Series Feed-Thru Veneer Splicer with top & bottom heating.Automatic lineal splicer with integral glue applicator. Can glue/join the edges of strips or similar pre-glued veneer. UREA based glue is preferable with veneers exposed to high temperatures during subsequent processing. -- Features: Gluing system to join veneer edges passing through a PVAC or urea "disc style" glue application zone at high speed or will join pre-glued veneers for an immediate tight hold and joint. Heating system with high efficiency and an effective heating width of only 12 mm. -- Size capacity: Can handle veneers, 0.3 - 2.5 mm (0.012" - 0.098") veneer thickness; min. veneer strip length approx 350 mm (13.8"); min. strip width 45 mm (1.77"); max. width. 49.2" (1250 mm) on throat side. -- Equipped with: Heating elements top/bottom with individual temperature control, approx. 3/4" (19 mm) wide narrow heating elements. -- Feed Chain/Drive: Maintenance-free high efficiency plastic chains prevent heat conduction and stains. With dual upper & lower feeding transport chains made of low-heat conductive fibre. Direct Drive variable feed speed from 40 - 180 FPM, 1.5 HP (1.1 KW) feed drive, disc roller drive feeding system w/thickness compensation. -- Complete with: Stainless & Chromed work surface, operator controls in rotating eye-level height control panel, and digital temperature settings & thermostats. Heating temperature approx. 220° C max. Length of heating section 1200 mm (47.2"). -- Includes: Chiller "which prolongs the glue pot life". -- Floor space: Approx. 115" x 78" x 58" high (2900 x 1960 x 1470 mm). -- Services required: Connected load: approx 11.8 KVA. Clean/Dry air supply: 1.2 CFM (30 NL/min) @ 90 PSI (6 bar)

L & L 400HP Belt Driven DensifierSpecifications: -- Main motor: 400 HP -- Densifier tank thickness: 3/4" Wall -- Tank dimensions: 50" Dia. x 48"Equipped with: -- Funnel-top lid with interlocked limit switch -- Heavy-Duty operator platform with stairway -- Soft Start -- Infeed Conveyor -- Mezzanine -- Was used to process PE film scrapNOTE: Unit has seen very little use.

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

LACEY-HARMER LD-2002 Diode LaserEconomical self-contained Visable Diode Laser, optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° to +40° C operating temperature, 90 V for 250 nano-sec surge protection. Beam angle 5 to 90 degrees, 5mW to 35mW output, 636 nm wave length for lines up to 20' projection. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed. -- Optional items consist of: Crossbar style mounting bracket, please add...$ 90; axis slide brackets for easy positioning, add...$ 125 or alteratively a simple universal stationary mounting bracket, please add...$ 30.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size of 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds. -- (2) Carbide rip blades.NOTE. Comes with a 208 Volt Transformer.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM. -- Laser light -- 480V to 240V Transformer -- Comes with some 12" 30 Tooth bladesNote : Seller claims the saw will give a glue line

MATTISON 404 Straight Line Rip Saw;Specifications: --25 HP - 3,600 RPM Direct drive arbor motor; --14" dia. max. saw blade cap. (9" smallest dia.), --1-1/2" dia. arbor; 4" thickness capacity. -- Table size 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. --Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. --Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds 62, 93, 124, & 186 FPM

MATTISON 229 Push Feed Moulder4-Head Push Feed Moulder, 4" x 10" capacity. -- Head sequence: 10 HP Top head, 10 HP left head, 10 HP right head, 10 HP bottom head. -- 20 HP feed motor. -- 2-1/8" dia. top and bottom spindles; 1-13/16" dia. left and right spindles. -- Includes (6) extra heads that go with the machine.Approximate dimensions of 11 feet long, 4.5 feet deep, and 5.5 feet tall. The machine weight is approx. 5 Tons.

MATTISON Model 228 Push Feed Moulder ( 4 ) HeadsSPECIFICATIONS -- 4-Head -- 16" x 6" width cap. -- Roll FeedHead sequence: --Top 20 HP, left tilting 7.5 HP, right tilting 7.5 HP, bottom 20 HP motor -- 2-1/8" dia. spindles and all heads jointed -- Sectional bed plates.Equipped with & Features -- Assortment of cutter heads -- Tools & wrenches, and factory dust hoods. -- List of heads with the machine :Width Qty2.5 11.5 12 93 34 55 16 28 510 216 1 NOTE : Some spec's have to be verified

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

Heat treated and dynamically balanced 36" aluminum disc. -- Commercial duty 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and rack and pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base. -- Optional: Motorized table elevation add.....$16, Motorized table elevation with limit switches add....., Electric brake add....., Circular attachment add....., Miter gauge add..... Hoist (chain drive lift for heavy parts) add..... JIL package (oil/dust proof switch components) add.. OPTIONS QUOTED UPON REQUEST.

Heat treated and dynamically balanced 18" aluminum disc. -- Commercial duty 1.5 HP direct drive motor. -- Heavy cast iron 10-1/2" x 24" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and manual tilting of the table. -- Sanding station is mounted to a heavy column. -- Heavy bolt-down cast iron base. -- Optional: Upgrade to a 2 HP motor add.....$240, Miter gauge add.....$270, Rack and pinion movement of the tilt add....$400, Single Phase 1.5 HP motor add.....$120.

MAX Spindle Sander VSI Made is USAOscillating Spindle Sander constructed for rugged use. -- 1 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

MAXPAK HCE60-FE-8 HORIZONTAL CLOSED DOOR BALER -- 8" Main Cylinder -- 30 HP Motor -- Full Eject -- Includes Infeed

MCDONOUGH Bandmill 62″ Bottom Wheel.