STETON P150C Two Platen Cold Press. (Was made as a hot press but heating is not working!) -- Approx. 118" x 51" (3500 x 1300 mm) overall platen size, side loading on 118" side. Pressure from bottom. 2 HP hydraulic pump. -- Maximum daylight opening 450 mm. (17"), less thickness of middle platen. Total pressure: 150 tons. -- Number of cylinders; eight (8). Dia. of cylinders: 3.35" (85 mm) -- Platen material: aluminum. -- Parallel guidance by toothed rack: Yes -- Pressing time selectable: Yes -- Pressing force: Electro-Hydraulic -- Technical type: Upstroking press -- Boiler: Approx 30 KW but heating is not working --Weight: 6.500 KG (14,300 Lbs)

STROUP 4' X 20' Cold PressSpecifications: -- 50" x 244" End Loading, Segmented, Bag press with motorized daylight opening. -- (2) Individually actuated, 50" x 122", segmented platens. -- Single air bag per platen with approx., 50 PSI specific pressure. -- Motorized adjustable daylight opening from 9" to 56". -- End loading with (2) rows of spring-loaded pop-up rollers in lower platen for easy loading/unloading of the press.

TYLER 703 Power Pod Cold PressTyler Air Pod Press with a Platen dimension of 40″ Wide X 87-1/2" Long. -- The Maximum Daylight Opening is 49.5″, and the pods will extend 9.5″ for a minimum opening of 40″. -- The top and bottom plates are dent free. -- The press is rated to 100 PSI and has (1) pod short of 100% pod coverage (being that the center bags are staggered). -- There are spring loaded bed rollers to aid in loading and unloading. .This machine has been cleaned and checked and there are no air leaks.

UNIMAK 160-S 5-Foot Wide Single-Sided Hot Melt Glue Spreader for Hot Melt Glue including PURHot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, particleboard, door spar, XPS, and polystyrene sandwich panels. All kinds of panels that adhesive application is required.Glue Types: Polyurethane hot melt (PUR) glue. Unfilled EVA,Pressure Sensitive Foil Types: As roll: PVC, P.P., finish foils and CPL foils As sheet Stock: Veneer, PVC, laminate, acrylic plates and door surfacesWorking Speed: 5 - 25 meter/Min (16.4 - 82 FPM)Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F) - chromed roller. -- Working Width: 200 - 1,600 mm (7-7/8" - 63"). -- Board Thickness: 4 - 40 mm (1/8" - 1-5/8"). -- Upper Spreader Roller, Silicone Coated and Ø 240 MM (9-1/2"). -- Upper Dosing Roller: Ø 215 MM – Chromed (8-1/2"). -- Lower Transport Roller: Ø 240 MM – Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately.

UNIMAK GS140-S Single Sided Hot Melt Glue Laminator4-Foot Wide Hot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, Particleboard, door spar, XPS and Polystyrene sandwich panels. All kinds of panels where adhesive application is required.Glue Types: Polyurethane Hotmelt (PUR) glue. Unfilled EVA.Pressure Sensitive Foil Types: As roll material - PVC, P.P., finish foils and CPL foils. As sheet Stock - Veneer, PVC, laminate, acrylic sheets and door surfaces. Working Speed : 5 - 25 m/Min (16.4 - 82 FPM).Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F), Chromed Roller. -- Working Width: 200 - 1,400 mm (7-7/8" - 55"). -- Board Thickness: 4 - 210 mm (1/8" - 2-1/4"). -- Upper Spreader Roller - 240 mm (9-1/2") diameter, Silicone Coated. -- Upper Dosing Roller: 215 mm (8-1/2") dia., Chromed. -- Lower Transport Roller: 240 mm (9-1/2") diam., Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately or purchased locally.

Brand New Hot Melt Adhesive Melter that can be adapted to your existing equipment.The 200 L Drum Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the EDrum Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements.Features: Safer working environment with optional platen protection system and vent hood. Reduced downtime related to drum changes with new drum fastening system. Customizable to specific users needs Integrated grammage dosing control. Teflon encapsulated seals.Technical Specifications: System 200L flat platen or 200L finned platen Drum capacity 200 liters Melting capacity flat platen system 60 Kg/Hr Melting capacity finned platen 130 Kg/Hr Max. number of pumps is two (2) Working temperature 30 - 240° C (86 - 464° F) Max. working viscosity 100,000 CPS Max. working pressure 100 Bar Electrical consumption 24 kWWe can also supply a selection of accessories to integrate & fit the Bulk Melter to your existing equipment, including: RTD hot melt hoses Slot Die applicators Edge Bander PUR retrofit Slot Die kits Manual and Automatic dispensing valves Mounting bracket packages Solid State Pattern Control Systems In-Line Filters Replacement parts for competitive systemsHose sizes will vary depending on your application; please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core 12' long - #6 core 16' long - #6 core 8' long - #8 core 12' long - #8 core 16' long - #8 core 8' long - #12 core 12' long - #12 core 16' long - #12 core Delivery from date of order approximately 10 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

Brand New Hot melt adhesive melter that can be adapted to your existing equipment.The 20 L Pail Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the B-Pail Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements.Features: Safer working environment with optional platen protection system and vent hood. Reduced downtime related to drum changes with new drum fastening system. Customizable to specific users needs Integrated grammage control. Teflon encapsulated seals.Technical Specifications: System 20L flat platen or 20L finned platen Drum capacity 20 liters Melting capacity flat platen system 8 Kg/h Melting capacity finned platen 25 Kg/h Max. number of pumps is one (1) Working temperature 30 - 240 Centigrade (86 F - 464 F) Max. working viscosity 100,000 cps Max. working pressure 100 bar Electrical consumption 8 KwWe can also supply all of your need's for accessories to make the Fit Up to your equipment including: RTD hot melt hoses Slot die applicators Edge Bander PUR retrofit slot die kits Manual and automatic dispensing valves Mounting bracket packages Solid state pattern control systems In-Line filters Replacement parts for competitive systemsSince Hose sizes will vary depending on your application please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core $461.00 12' long - #6 core $646.00 16' long - #6 core $750.00 8' long - #8 core $748.00 12' long - #8 core $957.00 16' long - #8 core $1,065 8' long - #12 core $835.00 12' long - #12 core $916.00 16' long - #12 core $1,158.00Delivery from date of order approximately 8 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

PUR Adhesive MelterValco Meltons IsoMelt Series has been specifically designed to process reactive hot melts such as PUR. Fast and easy changes to EVA or APAO with out adhesive degradation are no problem. The tank can accommodate 2 PUR standard bags, so that IsoMelt units can work with up to 40 liters of adhesive and meet the high production requirements of the woodworking, PVC and aluminum industries.These units are an ideal solution for profile wrapping, edge-banding and post forming. Easy removal of adhesive residue permits switching between PUR and other types of adhesive giving you the flexibility you need.Some Features : Air-Tight tank opening and blowing system Faster and safer cleaning due to its tilt-able tank and removable melting grid. Dry air blanket prevents moisture from reaching the adhesive Integrated grammage control accessible through a muti-function controller that simplifies operator programming. Apply the coating weight PreciselyEquipment Specifications: Tank capacity 40 liters Melting capacity 35 Kg/h Max.pumping capacity per pump 48 Kg/h Number of pumps two (2) Working temperature 30°c - 230°c (86°f - 446°f) Max. Working viscosity 100,000 cps Max. working hydraulic pressure 100 bar Max. Electrical consumption 6,200 W Adhesive types PUR / EVA / APAOWe can also supply all of your need's for accessories to make the Fit Up to your existing equipment including: RTD hot melt hoses Slot die applicators Edge Bander PUR retrofit slot die kits Manual and automatic dispensing valves Mounting bracket packages Solid state pattern control systems In-Line filters Replacement parts for competitive systemsSince Hose sizes will vary depending on your application please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core $461.00 12' long - #6 core $646.00 16' long - #6 core $750.00 8' long - #8 core $748.00 12' long - #8 core $957.00 16' long - #8 core $1,065 8' long - #12 core $835.00 12' long - #12 core $916.00 16' long - #12 core $1,158.00Delivery from date of order approximately 8 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

The 200 L Drum Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the EDrum Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements. -- Features: Safer working environment with optional platen protection system and vent hood.÷Reduced downtime related to drum changes with new drum fastening system.÷Customizable to specific users needs÷Integrated grammage dosing control.÷Teflon encapsulated seals. -- Technical Specifications:÷System 200L flat platen or 200L finned platen÷Drum capacity200 liters÷Melting capacity flat platen system 60 Kg/Hr÷Melting capacity finned platen 130 Kg/Hr÷Max. number of pumps is two (2)÷Working temperature 30 - 240° C (86 - 464° F)÷Max. working viscosity 100,000 CPS÷Max. working pressure 100 Bar÷Electrical consumption 24 kW -- We can also supply a selection of accessories to integrate & fit the Bulk Melter to your existing equipment, including:÷RTD hot melt hoses÷Slot Die applicators÷Edge Bander PUR retrofit Slot Die kits÷Manual and Automatic dispensing valves÷Mounting bracket packages÷Solid State Pattern Control Systems÷In-Line Filters÷Replacement parts for competitive systemsNear brand New Hot Melt Adhesive Melter that can be adapted to your existing equipment. Only used on 4 - drums

VITAP BLITZ CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, This Flexible machine is IDEAL for JIT or high production runs. -- Working Area:Useable working area "X" axis 36.2" (920 mm), "Y" axis 3.14" (80 mm), "Z" axis up to 1.57" (40 mm) material thickness with digital readouts -- BG & D Unit(1) 1 HP - 6,000 RPM horizontal drill motor; 0.47" (12 mm) Maximum drill bit dia. (1) Glue injector & (1) dowel Inserter with 1.57" (40 mm) Max. dowel lengthMachine is capable of processing dowel diameters from 6 mm dia x 25 mm long - 10 mm dia x 40 mm long dowels (currently setup for 8 mm dia dowels); -- Operator & Machine Control:CNC "Color Touch-Screen" Controller for function & simple part programming and program storage. -- Complete with: (1) 12" Dia. vibratory feed hopper, totally sealed electronically metered glue system with "Automatic" injector flushing; (1) 4.75 G (18 L) Glue tank & (1) 2.37 G (9 L) water tank;(4) Inclined vertical pneumatic hold-down clamps; Function selector control for boring only or doweling; Anti-slip table surface, Rack & pinion drive and centralized dust collection manifold.

WEEKE ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:Bar code control reader. All manuals, documentation & program disk provided with machine. -- Actual Model is WEEKE ABD 050.

WEEKE ABD 100 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; (1) glue & dowel injector with glue flow control; (1) 23" Dia. x 4" D vibrating hopper dowel feeder. -- Working Capacity: Material size from 20 mm - 1,250 mm (.75" - 49") long, 50 mm - 800 mm (1.9" - 31.5") wide, 10 mm - 60 mm (.4" - 2.4") thick. Machine is set up for 8 mm dia. x 30 or 35 mm long dowels (additional dowel sizes are optional). -- (2) Separate working fields with (4) 2-3/4"; LR x 3"; FB pneumatic top clamps can process up to (4) parts independently on the left-hand, right-hand or center-stops; work can be loaded in (1) field while it is being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Windows XP + Weeke "WoodWOP 5.0" operating system with graphic programming & error messaging; USB front side bus, 17" TFT flat screen monitor, CD-RW drive, Modem, standard keyboard & mouse.Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- WEEKE "ABD 100" is designed for small or large capacity horizontal drilling, gluing and dowel insertion; built on a Heavy Duty welded steel base; main horizontal beams hold the carriage for the boring head and glue/water injector. -- Complete with: HAND-HELD PRODUCTS "ADAPTUS 5.0 3800G04E" Handheld Barcode Reader.

WEEKE ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:Bar code reader. All manuals, documentation & program disk provided with machine. -- Actual Model is WEEKE ABD 050/12/NA.

WEEKE ABD 050/12/NA CNC BORE, GLUE & DOWEL INSERTER, with 350 Hrs. Only!: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle with 0.55 kW (3/4 HP) - 2,750 RPM Motor; (1) glue & dowel injector with glue flow control; (1) MAFU “MRA 250"; vibrating hopper dowel feeder, with Bowl size 14-1/2"; Dia. x 4-1/2"; D. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 50 mm - 800 mm (2" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) 3-1/8"; x 4-5/8"; pneumatic top clamps can process up to (4) parts independently on the left-hand, right-hand or center-stops;work can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator & Machine Control:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging;17" TFT flat screen monitor; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:HONEYWELL “HYPERION 1300G-2"; Bar code control reader. All manuals, documentation & program disk provided with machine. Actual Model is WEEKE ABD 050/12/NA

270 TON WEMHONER 110"; L TO R X 59"; F TO B DOWN-ACTING HYDRAULIC PRESS: MODEL KT-M-15/28-240. CLEARANCE BETWEEN FRAME IS 126"; L TO R X 37"; F TO B --. NOMINAL BED IS 110"; X 59";. -- FOUR CLAMP CYLINDERS THAT ARE SINGLE-ACTING; APPROX 8"; BORE; 6"; DIA RODS; APPROX 10"; MAX STROKE. -- ONE CENTER TRAVERSING CYLINDER THAT IS APPROX 3"; BORE WITH A 1.75"; DIAMETER ROD (APPROX 16"; MAX STROKE). -- MAX DAYLIGHT IS APPROX 16"; --. APPROX 28.5"; OPERATOR HEIGHT. -- GUIDED WITH ROLLERS AT EACH CORNER AND TWO GEAR & RACK GUIDES. -- SLIDE AND BED ARE 4"; THICK. SELF-CONTAINED HYDRAULIC SYSTEM: -- TWO RESERVOIRS THAT ARE APPROX 14 GALLONS EACH. -- 4 KW MOTOR (APPROX 5 HP; 1800 RPM; 440 VOLTS; 9.15 AMPS). -- HAWE PUMP (TYPE R60A; MAX 350 BAR); ETC -- APPROX SPEEDS: 99 IPM FAST DOWN; 2.0 IPM PRESSING ADJ; 99 IPM FAST UP. -- NO ELECTRICAL CONTROLS. -- APPROX OVERALL DIMENSIONS: 146"; X 65"; X 96"; TALL --. APPROX 30,000 POUNDS

Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- Professional removal and loading available at Buyer's cost.

Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- This particular press was only operated for about 1-1/2 years. -- Professional removal and loading available at Buyer's cost.

ACCU-SYSTEMS H49 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: (2) Working zones and an overall 49" max. width capacity. --(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, 1 HP - 18,000 RPM drill motor. -- (4) Vertical pneumatic hold-down clamps, function selector control for boring only or doweling, adjustable drilling speed. -- 1-9/16" (40 mm) Max. dowel length, setup for 8 mm dowel dia.; height adjustment up to 1-1/8" material thickness with digital readout. -- Operator Interface: CNC "Color Touch-Screen" Controller for function & part programming and program storage. -- Complete with:(1) 12" Dia. vibratory feed hopper. Totally sealed electronically metered glue system with 1-button flushing. -- 100 PSI high power glue pump, 2-1/2-gal. glue tank. Anti-slip table surface. 49" "X" axis cap. -- Rack & pinion drive, and centralized dust collection manifold.

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

BIESSE FSE Semi Automatic Dowel Inserter with Boring; 21-Spindle head (spindles on 32 mm centers) fixed horizontally for end boring, -- Equipped with:(8) Glue injectors & dowel inserters,(4) overhead "HD" pneumatic hold-down clamps. -- After the drilling cycle is complete, the head assembly traverses down to the glue & dowel injector line for the glue & dowel injection; quick cycle time. -- PLC function selector control for boring only, inserting only, or boring & inserting. -- Capacity: Handles 8 mm - 10 mm dia., digital indicator for adjustable dowel length from 25 mm - 50 mm, max. boring depth 70 mm. -- Features: Height adjustment w/digital readout for panel thickness, hydraulic brakes for adjustment of boring speed; 2.3 HP - 4,000 RPM motor.Complete with: -- (2) Side fences, front support table w/stop, glue reservoir tank with pressure control & rinsing tank for glue nozzles. -- 4way dowel feeding vibrator, and foot pedal for starting cycle.Note: Only (4) dowel line on the machine, you just need to add more dowel tube