Manufacturer’s Specifications Dimensions - Length: 46' 4? – 52' 6? - Width: 8' 6? - Height: 13' 6? - Weight: 42,000 – 47,000 lbs. Power Supply - 535 HP diesel engine - 200-gallon fuel capacity - PT Tech hydraulic clutch - Reversible radiator

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm Feedrate max50 m/min Continuously variable feed Cooling device Gluing aggregate Edge gluing JointOnly edge gluing Material of the feeding chainStainless steel Declaration of CE-conformity Conformity marking[CE mark](https://wtp.hoechsmann.com/en/lexikon/50233/ce_mark) Total connection9 kW Weight1.500 kg

RUF RB440 Briquette Press (2) Systems available

RUF Briquette Press More info coming!

As pictured never installed (2) available

The seller has confirmed that this Yates American resaw was in working/running condition when it was pulled from production. It is ready to load! - Vertical resaw - All parts and blades included - Approximately 35 years old - 50-60HP - 440 amp

Used Yates American Model B-26, 24” Double Planer, 75HP top, 40HPBottom, top and bottom 10 knife cutterheads, on the fly top and bottom jointers, 3 phase 480volt electrics, slide out lower cutterhead, top fixed cutterhead, 3-3/4” thickness capacity, approx. 20HP hydraulic feed works, power bed raise and lower, sectional pneumatic chip breaker, top infeed/outfeed rubber rollers.

Yates American E-12 End Matcher System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor

Planer Head Set Up Stand

Yuasa saw analyzer, great working condition comes with saw centers, magnifying camera and monitor.

Air Compressor Water Separator Single Phase 115V 16hz Good Condition

Recently removed from service Available immediately

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

Accu-Systems MMTJ Door Machine

75 KVA 480 volt to 240 volt

Action Pac Mulch Bagging Line Per manufacturer: Seal 480 Bags per hour Can also fill bulk totes Purchased new in 2021. Never installed into production.

AdcoWest Sawmill Canter - REFURBISHED - Equipped with Keyknife chipping heads including power - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer No wiring, switches, set works, or controls included but electric motors present are included. Feed through system as engineered by AdcoWest and operated by prior owner. (no infeed table included or feed through chain power) All other feed trough motors are included.

AEM 36" Sander

AER 5,000 CFM Dust System