Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical

Timber Treatment Solutions has many years’ experience in designing and manufacturing timber dipping equipment making our products the most advanced on the market. We are unrivalled in the quality of fabrication and reliability. Our automatic dipping tanks provide a rapid, completely safe treatment process for both the operator and the environment. A robust design and construction ensures the longevity of our products. The dipping tank systems generally include: – - a tank for dipping the timber - a hydraulically raised and lowered support frame to place the timber packs on - a manual or hydraulically operated top clamp There are also several additional options which can be added to further improve the performance of the dipping equipment: – - multiple dipping frames in the same tank to increase throughput - roof structure to protect against water ingress - tilting support frame to aid preservative run off - preservative dosing / mixing system - filtration of sawdust - stirring to homogenize the concentration of chemicals in the tank - heating

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

This system was purchased new and never installed. It is available to ship immediately. System includes: - Timberland Big Jake 6000 Scragg Mill: First saw set: Log Diameter: 8" minx22" max, Log Length: 96" Min x 20'6" max, (2) 56" Circle Saws, (2) 125 HP Motors, Setworks, Second Saw Set: (2) 48" Blades, (2) 75 HP Motors, Auto Adjust to center log, Operator Station with Joystick Controls - Brewco B1618 2-Head Grade Resaw (there are three 2-heads systems in this package fro a total of six resows): Setworks, Cutting cap: 18" x 18", 3-strand steel flat top infeed chain, 2" Blade, 60 HP Motor, 40" Band Wheels, Setworks - Hydraulic Unit for System: 50 HP, 100-Gallon, Temperature Controlled.

22" blade Manual operated 460v 3phase 15 HP motor

Position 1 005023 Panel Feeding and Loading TOMASSINI-RAPID/C 100-130 DOP Position 2 005024 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 3 005029 Roller Conveyors TOMASSINI-TA CINGHIE-SPEC Position 5 005030 Roller Conveyors TOMASSINI-TA 78 130 S-SPEC Position 7 005031 Brushing Machines MECCANICA VIESSE-SP 1300 Position 8 005032 Panel Stacking and Offloading TOMASSINI-RAPID/S 100-130 DOP

Belfab Dust System Control Starter Panel Control Panel Disconnect Control Panel Transformer Main Blower Stop/Start with running pilot light VFD with air flow control Environmental Rating: NEMA 12 Timebard Type: 22 PIN Cleaner Sensor Type: Delta P+ 2-20 MA Fan Outlet Silencer Fan Stand Timer Pulse Control Pulse Relays 460V/3PH No fan or motor supplied...can be obtaned at an additional price.

Toyota Model 42-5FG25 Forklift Sideshift

Toyota 7000 Capacity Forklift

Turner Machinery Company Resaw Good Condition

4650# capacity @ 24" load center 188" max reach Sideshift Tilt 3388 hours on the meter

3000 CFM 5 HP 5-1/2” static pressure

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

Tyrone-Berry Carriage Feed Drive SMA-225 60-hp Electric Motor Included

5000 lb Scissor Lifts (3) Available 3 Phase and Single Phase

It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”

12x70 Triple Pass Drum McConnell Biomass Burner has gas startup: Will need new brick after moved. Includes: Drum trunnions, motors, gear and end caps

48' Trailer Tipper Still under power Hydraulic unit and controls are kept indoors and working

Chop Saw with Infeed Unscrambler Swing cut off with a 12" blade 5 HP Motor

The seller has confirmed that this Unscrambler deck is in good working/running condition. It is ready to load! - Unscrambler deck - (8) chains